Chimney Repair & Repointing in Southeastern Massachusetts
Fix Leaks, Cracked Brick, and Failing Crowns Before They Cause Major DamageA leaking or crumbling chimney doesn’t just look bad – it can let water into your home, damage framing, and shorten the life of your roof. FC Home Improvement, LLC is a Taunton-based, fully insured contractor providing chimney repair, repointing, crown rebuilds, and chimney cap installation across Southeastern Massachusetts.
Whether you’re seeing water stains around the chimney, loose bricks, or cracking mortar joints, we find the source of the problem and repair it so your chimney is safe, stable, and sealed against the weather.
- Chimney leak detection & repair
- Brick repair & repointing
- Crown rebuilds & concrete caps
- Chimney caps & waterproofing
- Licensed & fully insured Taunton contractor
Complete Chimney Repair for Rooflines in Southeastern MA
Your chimney sits right where water, wind, and freeze–thaw cycles do the most damage. If the brick, mortar, crown, or flashing fail, water finds its way into your attic, ceilings, and walls.
FC Home Improvement, LLC handles:
- Chimney leak repair
- Brick and mortar repointing
- Chimney crown repair and rebuilds
- Chimney cap installation and replacement
- Basic chimney waterproofing and sealing
We work throughout Bristol County, Plymouth County, and parts of Cape Cod to keep chimneys solid and watertight as part of the overall roofing system.
Free Estimates in Taunton, MA
Looking for more than repairs? Visit our Roofing Services page for chimney repair and installation options.
Why Homeowners Choose FC Home Improvement for Chimney Repair
Homeowners across Southeastern Massachusetts and Cape Cod trust FC Home Improvement, LLC because we:
- Understand how the chimney, roof, and flashing work together as one system
- Are licensed & fully insured, protecting you and your property
- Provide clear inspections and straightforward explanations of what’s wrong
- Offer options where possible (repair vs more extensive work)
- Respect your property with jobsite protection and thorough cleanup
We treat chimney repairs like what they really are: critical protection for your home, not just cosmetic patchwork.
GAF Certified Contractor
GAF Certified™ Residential Contractor means our crew is factory-trained, vetted, and held to GAF’s installation standards—so your roof is installed right and eligible for enhanced GAF warranty options.
CertainTeed Certified Contractor
CertainTeed ShingleMaster™ means our crew is credentialed and trained to CertainTeed standards, so you get proven installation and eligibility for SureStart™ PLUS extended warranty coverage.
VELUX Certified Installer
Trained by VELUX. Expert skylight + flashing installs. Backed by the VELUX 10-year installation warranty.
Chimney Leak Repair – Stopping Water at the Source
Most chimney leaks don’t start inside the firebox – they start where the chimney meets the roof or where the masonry has cracked. If you’re seeing stains on the ceiling near your chimney, damp spots, or bubbling paint, it’s time to get it checked.
Common Leak Sources We Repair
We regularly fix:
- Failed flashing where shingles meet the chimney
- Cracked mortar joints allowing water to seep through the brick
- Damaged or missing counter-flashing around the chimney base
- Cracked or broken crowns/caps on the top of the chimney
- Open chimney tops without a cap letting water and debris straight in
A proper chimney leak repair often includes:
- Inspecting the chimney, roof, and attic area around the leak
- Identifying exactly where water is getting in
- Repairing or replacing flashing and counter-flashing as needed
- Addressing cracks in mortar, brick, or crown that are part of the problem
- Recommending waterproofing or a new cap if needed to prevent repeat issues
Chimney Repointing – Repairing Cracked Mortar & Loose Brick
Over time, mortar joints between bricks crack, crumble, or wash out. That’s not just cosmetic – it opens the door for water to get behind the brick and start breaking things down.
When Repointing Is Needed
You may need chimney repointing if:
- Mortar is cracked, missing, or powdery between bricks
- You see loose or shifting bricks in any section of the chimney
- Pieces of mortar are falling off the chimney onto the roof or ground
- The chimney looks “washed out” and rough instead of tight and solid
When we repoint a chimney, we:
- Remove loose or failed mortar to a proper depth
- Clean the joints to ensure good bond
- Refill joints with new mortar suited to exterior use
- Tool and finish the joints so they shed water properly
- Replace any damaged bricks that can’t be saved
Repointing restores the structural integrity of the chimney and helps keep water out.
Chimney Crown Repair & Rebuilds
The crown (or concrete cap) on top of the chimney is one of the most critical parts for keeping water out. When it cracks or breaks apart, water runs straight down into the brick and the flue area.
Common Crown Problems
We repair or rebuild crowns when:
- The concrete cap is cracked or broken around the edges
- Pieces are flaking off or missing
- The crown is not sloped correctly and holds standing water
- There’s a gap between the flue and the crown
Our crown work may include:
- Patching minor cracks with appropriate sealants
- Resurfacing a worn crown where the base is still sound
- Full crown rebuild where the old crown has failed completely
- Shaping the new crown to shed water and protect the sides of the chimney
A proper crown helps keep water out of the chimney structure for years.
Chimney Repair Across Southeastern Massachusetts
FC Home Improvement, LLC is based in Taunton, MA and provides chimney repair services across:
- Bristol County: Taunton, Raynham, Norton, Mansfield, Attleboro, Dighton, Berkley, and nearby towns
- Plymouth County: Bridgewater, Easton, Lakeville, Middleborough, Plymouth, and surrounding communities
- Cape Cod: Select areas including Mashpee, Bourne, Falmouth, Sandwich, and Barnstable
Chimney Repair & Repointing FAQs
What are the most common signs that my chimney needs repair?
Common signs include water stains on the ceiling or walls near the chimney, crumbling mortar, loose bricks, pieces of concrete on the roof near the chimney, or visible cracks in the crown or brick. If you see any of these, you should have the chimney inspected before the damage spreads.
Can a chimney leak be fixed without replacing the entire chimney?
Yes. Many chimney leaks are caused by failed flashing, cracked crowns, or localized mortar issues. In those cases, targeted repairs can solve the problem. If the chimney is severely deteriorated or leaning, more extensive work may be needed, but we always start by identifying the exact cause.
How often should a masonry chimney be inspected?
As a general rule, a masonry chimney should be visually inspected at least once a year, especially in our New England climate. If you see cracking, staining, or pieces of mortar or brick on the ground or roof, schedule an inspection sooner.
What is chimney repointing and why is it important?
Repointing is the process of removing failed mortar between bricks and replacing it with new mortar. It’s important because it restores the structural strength of the chimney and helps keep water from working its way into the brick and interior of your home.
Do I really need a chimney cap?
Yes, in most cases a chimney cap is a smart investment. It helps keep rain, snow, animals, and debris out of the flue. Without a cap, water and debris can accelerate damage to the flue tile, crown, and interior parts of the chimney.